• Fuldtømmer shelter F1 sammensat af tre moduler
  • 3 module shelter
  • 3 module shelter
  • 3 module shelter
  • 3 module shelter
  • 3 module shelter
  • 3 module shelter
  • 3 module shelter
  • 3 module shelter
  • 3 module shelter
  • 3 module shelter
  • 3 module shelter
  • 3 module shelter
  • 3 module shelter
  • 3 module shelter
  • 3 module shelter

3 module shelter

Incl. VAT
Full timber variant:
Built-in table:

In addition to the "ordinary" rectangular models, we offer a combined model where 3 "modules" are built together at 45 degrees.

In addition to providing a natural assembly and orientation towards the "centre" and in most cases thus the fire, these built-in models offer a relatively large amount of square meters for the money.

The 3-module shelter is offered both as F1 = knot joints or as F2 = shock joints. Both models with straight roof.

Delivered fully assembled and with grass roof.

    Construction:

    • Fixed floor in boards, raised approx. 45 cm above the ground. The internal size 2.5 meters in depth and width 2.5 m at the front and 3.5 / 4.6 m at the rear wall.
    • As a plinth, round trunk pieces are used as standard, set on top of concrete tiles.
    • The beams are red spruce cut on two surfaces and the inner side. The height is 15 cm and the width 16 – 18 cm.
    • Design of the front is with "arch" or "step" as desired. In assembly sets, the front is cut in "steps" and a straight line in the front.
    • The roof is a straight roof, i.e. roof with slope to the rear, which ensures that it is always dry in front of the shelter.
    • In front is a large overhang of 1.4 metres. The roof is made of 22 mm planed boards with tongue and groove and a strong rubber sheet as a base for the grass roof itself, which consists of sphagnum, sown with a grass seed mixture.